Return to the Product list
Click Here to Return to the Product List

Lap-Chole Tray

 Made in U.S.A.

             Sterilization Tray | Sterilization Baskets | Accessories

No. 5058-76LC
Lap-Chole Tray
Features:
Designed to organize your instruments in one universal container. The tray can be used for various laparoscopic procedures such as chloecystectomy, nephrectomy, thoracoscopy, and laparoscopy general surgery.
The tray is constructed of perforated stainless steel of which 33% is open surface. The large amount of open area allows quick drainage of fluids and circulation of gas during sterilization. Fifteen universal slotted silicone rubber instrument holders allow endoscopic instruments to remain securely in place at all times.
Due to various sterilization procedures and sterilization equipment, we offer two styles of trays. The model 5058-76LCAS features a 10mm telescope holder while the model 5058-76LCBS is without a telescope holder. Whichever model you choose, you will gain the flexibility that a truly universal tray has to offer.

                                   Specifications


      

The Lap-Chole trays universal silicone rubber instrument holders allow instruments of various diameters to fit in the same slot (see photo left). Any of the fifteen slots can hold a 5mm, 10mm, 11mm, and 12mm endoscopic instrument. The ring handle slot, made of stainless steel, fits a wide range of grip styles and can be easily bent for positioning to accommodate any odd instruments (see photo above).


Replaceable silicone rubber inserts offer:
Instruments cushioned against damage during processing.
Tray set-up flexibility.
Extended useful service life of instruments and tray.
Lower rate of instrument down time.
 
These universal holders have a unique design to adapt to almost any manufacturer's instrument. We are committed to producing a universal laparoscopic tray.


























Multilevel constuction will accommodate eighteen endoscopic instruments. One 10mm telescope is held securely in a separate silicone rubber slotted holder to ensure safety from damage. The lower level has fifteen universal numbered slots that can handle 5mm, 10mm, 11mm, and 12mm instruments; with one 5mm slot for graduated probes and needle tip aspirators.
the upper lift-out tray is for minor and GYN instruments; such as forceps, needle holders, scissors, towel clips, retractors, knife handles, light cord, cautery cord, endoloop applicator, and other miscellaneous instruments. Three No. 5058-80D instrument storage racks are included for easy handling of ring handled instruments.





The hinged cover is easily removed from the tray by slip joint, butt hinges. Latches hold the cover securely to the tray. A name plate of 1" x 5" is located in the center of the lid for ease of tray identification.
  Stamped lettering of the name plate can be provided at no additional cost if specified at time of ordering (example LAP-CHOLE 1). Swing-down handles are provided for ease in carrying.
If the standard size does not meet your needs, we encourage you to call 1-800-328-2358.

































Specifications: (inside dimensions)
Product No.
5058-76LCAS
5058-76LCBS
Description
with 10mm
Telescope Holder
without 10mm
Telescope Holder
Main Body Width
12"
  Length
21"
  Depth
6"
Lift-out Tray Width
10"
11"
  Length
14"
  Depth
3 7/8"
Slotted Inst. Holders
17
16
Lid
Hinged Removable
Material
22 gauge #304 Stainless Steel, Silicone Rubber
Shipping Weight
15 lbs.


TOP